Set of Avtorenovacia for restoring two leather seats

Set of Avtorenovacia for restoring two leather seats

A kit for restoring worn and scuffed leather seats without replacing the leather or removing the seats from the car. It keeps the original stitching and patterns and refreshes the colour. The kit is also suitable for leather armrests, steering wheels and gear knobs. The colour is mixed individually to a sample or recipe.

Features

• Restores worn and scuffed areas on the seats
• No reupholstering or leather replacement needed
• Keeps the original stitching and patterns
• Seats do not need to be removed from the car
• Dye tinted to order; the supplier holds a database of interior colours for many makes and models and can also match a sample supplied by the customer, for example a headrest

Set contains

• 100 ml FINISH CONVERTER: alcohol-based preparation that converts the old surface
• 100 ml LEATHER DEGREASER: removes surface and deeply absorbed grease so that the following layers bond properly
• 100 ml ADHESIVE PRIMER: water-based primer that improves adhesion between the old leather and the dye
• 250 g LEATHER DYE: water-based polymer dye for car leather, tinted to your colour; it forms a new layer over the worn surface
• 100 g LEATHER FINISH: water-based polymer lacquer that seals the dye and protects it from rubbing off and pigment transfer; matt or gloss finish according to the order
• 2 pcs fine sandpaper
• 2 pcs special sponges for light abrading
• 4 pcs applicator sponges for dye and lacquer
• 1 pair of work gloves
• Detailed step-by-step instructions

Use

1. Recommended: clean the interior thoroughly with Leather Cleaner as directed on that product. The set is enough for restoring two seats.
2. Smooth rough edges around cracks with the sandpaper; key the remaining sound areas with the abrasive sponges, then wipe with a damp cloth.
3. Wearing the gloves, wipe the whole surface with FINISH CONVERTER on a clean cloth.
4. Wipe again with LEATHER DEGREASER on a clean cloth to leave a clean, degreased base.
5. Apply ADHESIVE PRIMER over the whole surface with a sponge and leave to dry for 5-10 minutes. Any crack filler must be applied before this step.
6. Apply LEATHER DYE with a sponge, first on the worn areas, then over the whole surface with light dabbing movements (a flock roller or spray gun can be used instead).
7. Apply LEATHER FINISH with a sponge or another method; for a lasting result apply several coats over the whole surface.
8. Recommended: after 7 days use Leather Protection Lotion to soften, nourish and protect the leather, ideally at least once a month, with a sponge or a clean microfibre cloth.

If the leather is heavily cracked or torn, add a leather filler (leather repair kit) to the order to achieve the desired result.