EN
Bulgarian
Technical info
- Weight: 1.00
- Producer: HOLTS
- EAN: 5010218506671
- Purpose for supplements: За радиатор
- Measure: 250 ml
Description
Product Holts for sealing leaks in the radiator and block 250ml
Holts product for sealing leaks in engines (block, head, head gasket, block plugs, water pump gasket) and radiators (radiators, hoses). Suitable for all types of antifreeze, with no need to drain or flush the cooling system. Pour-and-go formula. Helps reduce corrosion and prevent future leaks.
Use
- With the engine OFF and COLD, remove the radiator/expansion tank cap.
- Shake the bottle well for at least 30 seconds, pour the contents into the radiator/expansion tank and top up with antifreeze if necessary. Refit the cap.
- Start the engine and set the heater to maximum for 15-20 minutes, without revving. When the engine reaches operating temperature the leaks should stop within a few minutes.
- With the engine off and cold again, make sure the system is full.
Check the system regularly and top up with antifreeze if necessary. Do not use in dirty or partially blocked radiators. If there is no cap, the contents can be poured through the top hose. For cars with up to 7 l of antifreeze use half of the pack; one pack is suitable for cars with up to 21 l of antifreeze.
Warning: do not remove the radiator/expansion tank cap until the engine has cooled completely.
