Add-on Resurs for oil of petrol units 150ml

Add-on Resurs for oil of petrol units 150ml

Engine oil additive for restoring and protecting modern petrol engines, with or without turbochargers, against wear. 50ml pack.

Features

• The active component is a nano powder of copper, tin and silver alloy, which forms a coating on the friction surfaces and evens out micro-defects on the cylinder-piston group and crankshaft bearings
• Under heat and pressure the particles form a porous structure that holds oil in the friction zone, protecting parts during cold starts, overheating, sudden acceleration and braking
• The manufacturer states that it blocks blow-by of gases from the combustion chamber, raises compression and reduces oil loss
• Compatible with all types of oil

Use

1. Ideally change the oil and oil filter before using the additive.
2. Warm the engine to operating temperature, then switch it off.
3. Shake the bottle for 20-30 seconds.
4. Pour the contents into the oil filler neck.
5. Start the engine and leave it idling for 10-15 minutes.

Dosage

• Engine oil capacity 3 to 5 litres: up to 100,000km, 50ml pack; 100,000 to 170,000km, 100ml pack; over 170,000km, 100ml pack
• Engine oil capacity 6 to 10 litres: up to 100,000km, 100ml; 100,000 to 170,000km, 150ml; over 170,000km, 150ml
• Engine oil capacity 10 to 12 litres: up to 100,000km, 150ml; 100,000 to 170,000km, 250ml; over 170,000km, 300ml

When to use it

• Increased fuel consumption
• Low or uneven compression
• Increased noise and engine vibration
• Significant oil loss of about 150g per 1,000km